Don't ignore these
Electrical Panel Upgrade electrical service
What you get
Electrical Panel Upgrades & Replacement done right.
If your home still has a Federal Pacific, Zinsco, Pushmatic, or undersized 60A/100A panel, it is at the end of its safe service life. We replace residential and commercial panels with modern Square D, Eaton, and Siemens equipment rated for today's loads — EV chargers, heat pumps, induction ranges, and home offices.
A full panel upgrade typically includes a new main breaker, fresh bus bar, individually labeled circuits, whole-home surge protection, proper grounding and bonding, a new meter socket if needed, and a permit and inspection through your local AHJ. Most single-family upgrades are completed in a single day with minimal downtime.
We also handle service upgrades from overhead to underground, mast and weatherhead replacement, and coordination with your utility for meter pulls and reconnects.
Our Process
Our electrical panel upgrades & replacement process.
Four steps. No surprises. Every job runs the same way whether it's a quick fix or a full upgrade.
- 01
Load Calculation
We measure your existing load and right-size your new service (typically 200A or 400A).
- 02
Permit & Utility Coordination
We pull the permit and schedule the meter pull with your utility.
- 03
Panel Replacement
Old panel comes out, new panel and surge protection go in, every circuit labeled.
- 04
Inspection
Final inspection by your AHJ — we handle the paperwork.
Built to last
Why our work holds up.
OEM parts only
Breakers, devices, and panels from Square D, Eaton, Siemens, and Leviton — never aftermarket knockoffs.
Right-sized components
Wire gauge, breaker rating, and box fill matched to the real load — not 'close enough.'
Code-compliant wiring
Every circuit installed to the current NEC and your local AHJ amendments.
Load-tested before sign-off
Every repair tested under actual load with a clamp meter, not just continuity-tested.
Sealed device boxes
Listed boxes, proper torque, anti-short bushings, and weatherproof gaskets where required.
Written workmanship warranty
If the same issue returns under normal use, we come back at no charge. Period.
Before we arrive
Safety first.
A few quick reminders so you stay safe and we can move fast when our truck pulls up.
Electrical Panel Upgrades & Replacement can involve hidden heat, loose connections, overloaded circuits, damaged insulation, old grounding, or equipment that looks normal until it is tested. We start with a controlled inspection so the unsafe part of the system is not guessed at or ignored.
Before work begins, the electrician explains what failed, what must be repaired now, and what can be planned for later. You approve the scope and price first. The finished circuit is tested under load, the work area is cleaned, and any permit or inspection item is documented.
If the problem involves smoke, a burning smell, water near electrical equipment, repeated breaker trips, buzzing, or visible sparks, stop using the affected area and call from a safe place. Do not open the panel or remove devices while power may still be live.
For older buildings, we also check whether the existing equipment can safely support the repair. A quick fix is not enough if the circuit is overloaded, the grounding path is weak, the device box is damaged, or the breaker no longer matches the wiring it protects.
For planned work, we review access, load, equipment location, future use, code rules, and inspection needs. That prevents avoidable changes later and helps the finished installation work safely when the circuit is under normal daily use.
FAQ
Questions about this service.
Reviews
What customers say
"Called at 11pm with sparking outlets. VoltGuard Electric had a licensed electrician at my door in 70 minutes and made it safe before sunrise."
"Upfront pricing, clean work, permits pulled. We use them for every electrical panel upgrades & replacement job across our portfolio."
"Professional, courteous, and the price they quoted was the price I paid. The workmanship guarantee was a no-brainer."
Need electrical panel upgrades & replacement today?
Licensed electricians answer 24/7. No call centers, no robots.
Related services
Other electrical work we handle
24/7 Emergency Electrical Repair
Power out, sparking outlets, burning smell? Licensed electricians dispatched fast — day or night.
Learn more
Circuit Breaker & Fault Diagnosis
Find and fix the real cause of nuisance trips, short circuits, ground faults, and arc faults.
Learn more
EV Charger Installation (Level 2)
Tesla, ChargePoint, Wallbox, Grizzl-E. 40A–80A circuits installed clean and code-compliant.
Learn moreElectrical service notes
work starts with a simple safety check and a clear explanation of the problem. The electrician confirms power conditions, shutoff points, wire size, breaker rating, grounding, device condition, and any signs of heat or damage before recommending work. You approve a flat price first. After the repair or installation, the circuit is tested under load and the work area is left clean. For planned projects, we also review load, access, code requirements, permit needs, and future expansion before parts are ordered. For urgent problems, we make the area safe first, then explain the permanent repair. Call (689) 312-9773 any time for licensed electrical help.
VoltGuard Electric should be handled by a licensed electrician when heat, repeated trips, damaged wiring, buzzing, or burning smells are involved. The safest first step is to stop using the affected circuit and call from a safe place. The technician checks the panel, device, grounding, wire size, and load before work begins.
Clear pricing matters on electrical work. You approve the scope before repairs start. After the work is complete, the electrician tests the circuit, explains what was fixed, and points out any code or permit items that should be handled next.
VoltGuard Electric should be handled by a licensed electrician when heat, repeated trips, damaged wiring, buzzing, or burning smells are involved. The safest first step is to stop using the affected circuit and call from a safe place. The technician checks the panel, device, grounding, wire size, and load before work begins.
Clear pricing matters on electrical work. You approve the scope before repairs start. After the work is complete, the electrician tests the circuit, explains what was fixed, and points out any code or permit items that should be handled next.
VoltGuard Electric should be handled by a licensed electrician when heat, repeated trips, damaged wiring, buzzing, or burning smells are involved. The safest first step is to stop using the affected circuit and call from a safe place. The technician checks the panel, device, grounding, wire size, and load before work begins.
Clear pricing matters on electrical work. You approve the scope before repairs start. After the work is complete, the electrician tests the circuit, explains what was fixed, and points out any code or permit items that should be handled next.
VoltGuard Electric should be handled by a licensed electrician when heat, repeated trips, damaged wiring, buzzing, or burning smells are involved. The safest first step is to stop using the affected circuit and call from a safe place. The technician checks the panel, device, grounding, wire size, and load before work begins.
Clear pricing matters on electrical work. You approve the scope before repairs start. After the work is complete, the electrician tests the circuit, explains what was fixed, and points out any code or permit items that should be handled next.
VoltGuard Electric should be handled by a licensed electrician when heat, repeated trips, damaged wiring, buzzing, or burning smells are involved. The safest first step is to stop using the affected circuit and call from a safe place. The technician checks the panel, device, grounding, wire size, and load before work begins.
Clear pricing matters on electrical work. You approve the scope before repairs start. After the work is complete, the electrician tests the circuit, explains what was fixed, and points out any code or permit items that should be handled next.
VoltGuard Electric should be handled by a licensed electrician when heat, repeated trips, damaged wiring, buzzing, or burning smells are involved. The safest first step is to stop using the affected circuit and call from a safe place. The technician checks the panel, device, grounding, wire size, and load before work begins.
Clear pricing matters on electrical work. You approve the scope before repairs start. After the work is complete, the electrician tests the circuit, explains what was fixed, and points out any code or permit items that should be handled next.
VoltGuard Electric should be handled by a licensed electrician when heat, repeated trips, damaged wiring, buzzing, or burning smells are involved. The safest first step is to stop using the affected circuit and call from a safe place. The technician checks the panel, device, grounding, wire size, and load before work begins.
Clear pricing matters on electrical work. You approve the scope before repairs start. After the work is complete, the electrician tests the circuit, explains what was fixed, and points out any code or permit items that should be handled next.
VoltGuard Electric should be handled by a licensed electrician when heat, repeated trips, damaged wiring, buzzing, or burning smells are involved. The safest first step is to stop using the affected circuit and call from a safe place. The technician checks the panel, device, grounding, wire size, and load before work begins.
Clear pricing matters on electrical work. You approve the scope before repairs start. After the work is complete, the electrician tests the circuit, explains what was fixed, and points out any code or permit items that should be handled next.